John Lewis JLTDH14 - Manual (Page 13)

Delay start
With the Delay start button, you can
delay the start of a programme by: 3,
6 or 9 hours.
1. Select the programme and additional
functions.
2. Press the Delay start button.
3. To activate the delay timer, press the
Start/Pause button.
Starting the programme
Press the Start/Pause button. The
programme starts and the LED Drying is on.
Changing programme
To change a programme which has been
selected by mistake once the programme
has started, first turn the programme
selector to Off and then reset the
programme.
The programme can no longer be
changed directly once the
programme has started.
Putting in extra items or
taking items out before
end of programme
1. Open loading door.
Warning! Laundry and drum can
become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must
audibly lock.
4. Press the Start/Pause button to
continue the drying cycle.
Drying cycle complete /
removing laundry
Once the drying cycle is complete, the LED
End is on as well as warning lamps: Filter and
Full tank. If the Alarm button has been
pressed, an acoustic signal sounds
intermittently for about one minute.
13