John Lewis JLTDH14 - Manual (Page 16)

If the fine filter is not fitted, the large
mesh filter will not snap into place
and the loading door cannot be
closed.
Cleaning the door seal
Wipe the door seal with a damp cloth
immediately after the drying cycle has
finished.
Emptying the water
reservoir
Empty the water reservoir after every drying
cycle.
If the water reservoir is full, an active
programme will break off automatically and
the warning lamp Full tank lights. In order to
continue the programme, the water
reservoir must first be emptied.
Warning! The condensed water is
not suitable for drinking or for
preparing foodstuffs.
1. Take out drawer containing water
reservoir completely 1 and pull up the
water reservoir's drainage pipe as far as
it will go 2.
1.
2.
2. Pour the condensed water out into a
basin or similar receptacle.
3. Slide the outlet connections in and refit
the water reservoir.
If the programme has been interrupted
as a result of the water reservoir being
full: Press the Start/Pause button to
continue the drying cycle.
The water reservoir has a volume of
approx. 4 litres.
The condensed water can be used as
distilled water, e.g. for steam ironing.
However it must first be filtered (e.g.
with a coffee filter) to remove any
residue and small pieces of fluff.
16