John Lewis JLBIOS664 - Manual (Page 32)

32
1
2
10.Repeat the procedure described in point 9. for
the middle pane marked by a decorative frame
on 4 sides (Fig. 8).
11.Gently lift and carefully take off the innermost pane
(Fig. 9).
Clean the oven door with lukewarm water and a
soft cloth. Do not use products such as scouring
pads, steel wool, abrasive sponges or acids be-
cause they could damage the special heat-reflect-
ing surface of the internal panes of glass.
After cleaning, reassemble the panes in the door
and then the oven door, following the procedure
described above in reverse. Make sure you
reposition the panes correctly.
To perform this operation correctly, pro-
ceed as follows:
a) the clear innermost pane must be reassembled
so that the screen-printed symbol in one corner
is placed in the upper left-hand corner as
shown in Fig. 10a.
The middle pane must be put back into the right
seat as shown in Fig. 10b.
1
2
Fig. 10b
Fig. 10a
)
Fig. 8
Fig. 9 9 9 9 9