John Lewis JLBIOS664 - Manual (Page 8)

8
To set the correct time of day:
a) while the symbol is flashing, set the correct
time of day by pressing buttons “ “ or “ “.
The time arrow symbol will disappear about
5 seconds after the correct time is displayed.
b) if the symbol is not flashing anymore,
press Time Functions button twice.
Then, proceed as described in point a).
Before first use
The oven should be heated without food.
To do that, proceed as follows:
— press button
to switch on the oven.
— press Oven function button twice and select
the "Conventional Cooking" function .
— set the temperature to 250 °C using the
increasing push button “ “.
— Allow the oven to run empty for
approximately 45 minutes.
— open a window for ventilation.
This procedure should be repeated with the
"Fan Cooking"
and "Full Grill"
function for approximately 5-10 minutes.
Remove all packaging, both inside
and outside the oven, before using
the oven.
When the oven is first connected to the electrical
supply, the display will automatically show 12:00
and the symbol
will flash.
Ensure the correct time of day is set before using
the oven.
When the oven is first installed