Setting dbs receiver input channel & brand, Turn on dbs receiver, Access main menu screen on vcr – JVC D-VHS User Manual

Page 26: Access dbs receiver set screen, Select dbs receiver input chan- nel, Bc d, Initial setting (cont.)

Advertising

Masterpage:Left-FullCol

Filename [HM-DH5U_Eng.fm]

INITIAL SETTING (cont.)

Setting DBS receiver input channel &
brand

After installation, set the DBS receiver’s input channel
and its brand correctly; otherwise, the Controller cannot
work correctly.

Turn on DBS receiver

Select a channel other than channel 100 or 205
on your DBS receiver.

Access Main Menu screen on VCR

Press [MENU].

Access DBS Receiver Set screen

Select DBS receiver input chan-
nel

•

If your DBS receiver is connected to your
VCR’s [ANTENNA IN] terminal on the rear
panel
Press [D E] until the channel number
representing the DBS receiver’s output (“ON
CH3” or “ON CH4”) appears on the screen.

•

If your DBS receiver is connected to your
VCR’s [AUDIO/VIDEO] input connectors on
the front panel
Press [D E] until “ON F-1” appears on the
screen.

•

If your DBS receiver is connected to your
VCR’s [AUDIO/VIDEO INPUT (L-1)] or
[AUDIO/VIDEO INPUT (L-2)] connectors on
the rear panel
Press [D E] until “ON L-1” or “ON L-2”
appears on the screen.

•

If you do not use a DBS receiver
Press [D E] until “OFF” appears on the screen.

•

Turn on the VCR and the TV, and select the AV
mode on the TV.

•

Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].

C D

VCR

CABLE

/DBS

A Press [D E] to

move the arrow to
“TUNER SET UP”,
then press [G] or
[OK].

B Press [D E] to

move the arrow to
“DBS SET UP”,
then press [G] or
[OK].

Press [FG] to move
the arrow to “INPUT
CH”.
Your selection
depends on how your
DBS receiver is
connected to your
VCR.

FUNCTION SET UP

INITIAL SET UP

TUNER SET UP

THEN PRESS [OK]

DBS SET UP

SELECT WITH ARROW KEYS

SELECT

EXIT

INPUT CH

BRAND

TEST MODE

OFF

TUNER SET

CABLE SET UP