Adjusting tracking condition-tracking adjustments, Selecting monitor sound-audio monitor, Adjusting tracking condition – JVC D-VHS User Manual

Page 30: Selecting monitor sound

Advertising
background image

Masterpage:Left-FullCol

30

EN

Filename [HM-DH5U_Eng.fm]

PLAYBACK (cont.)

C

Adjusting tracking condition

— Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition.
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the
signal to enable optimum picture quality during
playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during
playback, use the manual tracking following the
procedures below.
• You can also use the manual tracking during slow

motion playback (A page 34). During slow motion
playback, simply press [CHANNEL +] or [–] on the VCR
(or [TV/VCR CH +] or [–] on the Remote) to adjust
tracking.

1

Activate manual tracking

Press [CHANNEL +] and [–] on the front panel at
the same time during playback.

2

Eliminate the noises on the TV screen

Press [CHANNEL +] or [–].

Press it briefly for a fine adjustment, or press and
hold for a coarse adjustment. Watch the screen
and continue adjustment until optimum picture
and sound quality are achieved.

To reactivate automatic tracking, press
[CHANNEL +] and [–] on the front panel at the
same time. The automatic tracking becomes
active again.

D

Selecting monitor sound

— Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound or SAP
sound is recorded, press [A. MONITOR] on the Remote
or [AUDIO MONITOR] on the front panel.
Each time you press the button, sound changes as
follows:

S-VHS/VHS

D-VHS

NOTES:

The above indication appears when “SUPERIMPOSE” is set to
“ON” (

A

page 66), though the monitor sound changes in

sequence.

If the tape being played back has no Hi-Fi sound track, the
normal sound track will be heard regardless of this setting.

“UL RV”

: Normally select this.

Hi-Fi sound is played back.

“UL”

: Sound on the left Hi-Fi channel is

played back.

“RV”

: Sound on the right Hi-Fi channel is

played back.

“NORMAL” : Sound on the normal track is played

back.

“MIX”

: Both sounds on the Hi-Fi track and

normal track are mixed and played
back.

“UL RV”

: Normally select this.

“UL”

: Sound on the left channel is played

back.

“RV”

: Sound on the right channel is played

back.

NORMAL

MIX

L R

L

R

L R

L

R

HM-DH5U_Eng.fm Page 30 Friday, June 25, 2004 11:42 AM

Advertising