Tape position indicator, Playback and recording features (cont.) – JVC HR-J430KR User Manual
Page 20
20
1
2
4
5
3
6
8
0
7
9
COUNT
0:33:27
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant
ReView. The position of " " in
relation to "B" (Beginning) or "E"
(End) shows you where you are on
the tape.
NOTE:
SUPERIMPOSE must be set to ON, or the indicator will not
appear (
੬
pg. 17).
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after
rewinding.
* Before continuing, ensure that the VCR is in stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTES:
● To do the above using the VCR's controls:
During Stop, turn the SHUTTLE all the way to the left and
release it instead of pressing REW, and then press PLAY or
POWER within 2 seconds.
● If you want the "next function" to automatically start when the
counter reads "0H 00M 00S" (instead of at the beginning of
the tape), press C. MEMORY so that the counter memory
indicator appears on the front display panel before pressing
REW.
B
E
+
+
+
∞
5
6
q
PLAYBACK AND RECORDING FEATURES (cont.)
MENU
POWER
SHUTTLE
PLAY
POWER
REW
C.MEMORY
FF
TIMER
PLAY
MENU