JVC HR-J430KR - Manual (Page 24)

24
1 2
4 5
3
6
8
0
7 9
Record One Program While
Watching Another
ENGAGE TV MODE
1
During recording...
● If using the RF connection ( ੬
pg. 4), press TV/
VIDEO. The VCR's VIDEO indicator goes out and the
TV broadcast being recorded disappears.
● If using the AV connection ( ੬
pg. 4), change the
TV's input mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
Recording
∞ 5
6
q
PLAYBACK AND RECORDING FEATURES (cont.)
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
● Make sure "SUPERIMPOSE" is set to "ON" ( ੬
pg. 17).
OSD
C.RESET
TV/VIDEO