JVC HR-J430KR - Manual (Page 35)

35
Edit To Or
From Another
VCR
You can use your VCR as the player or the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the player’s VIDEO OUT
and AUDIO OUT connectors and the recorder’s VIDEO
IN and AUDIO IN connectors.
● When connecting to a Hi-Fi VCR, connect your
VCR's AUDIO IN/OUT connector to the AUDIO L
IN/OUT connector on the Hi-Fi VCR.
LOAD CASSETTES
2
Insert the playback cassette into the player and the
cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Set to AUX. With this VCR, press NUMBER key “0” (AU
appears on the front display panel in place of a channel
number).
START PLAYER
4
Set to its play mode.
START RECORDER
5
Set to its record mode.
NOTE:
Connections made to the front panel AUDIO/VIDEO input
connectors automatically override those made to the rear panel
AUDIO/VIDEO input connectors.
Player Your VCR
AUDIO OUT
VIDEO IN AUDIO IN
Another VCR Recorder
1 2
4 5
3
6
8
0
7 9
Control Two JVC VCRs
The supplied remote control is capable of controlling two
JVC VCRs independently using the A/B CODE switch. You
can set this VCR so it responds to remote commands only
when the switch is set to B, and another VCR so it responds
to commands when the switch is set to A. The switch is
preset to A because this VCR normally responds to A-code
signals. You can easily modify this VCR to accept B-code
commands.
1 Unplug the VCR’s power cord from the AC outlet.
2 Set the A/B CODE switch on the remote control to B.
3 Plug the VCR’s power cord back into the AC outlet.
4 Turn the VCR’s power back on by pressing POWER on
the remote.
The VCR will now respond only to B-code commands.
VIDEO OUT
POWER
NUMBER "0"
A/B CODE