John Deere 950J LGP User Manual

Page 20

Advertising
background image

Net engine power is with standard equipment including air cleaner,
exhaust system, alternator, and cooling fan

at test conditions

specified per ISO9249.

No derating is required up to 10,000-ft.

(3050 m) altitude.

Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards.
Except where otherwise noted, these specifications are based on units with standard equipment, modular ROPS/cabs, full fuel tanks,
and 175-lb. (79 kg) operators.

DKA9501050J Litho in U.S.A. (07-04)

950J 1050J

Engine

● ●

Certified to EPA Tier 3 emissions

● ●

Direct-injection, intercooled, turbocharged
in-line 6-cylinder

Liebherr D 936-L A6

Liebherr D 946-L A6

● ●

Spin-on engine oil filter with anti-drain-
back valve

● ●

Fuel system includes precleaner with
water separator

● ●

Oil-to-water engine oil cooler

● ●

Dual-element dry-type aspirated air cleaner
with automatic dust ejector

● ●

Intake-mounted air-inlet heater start aid

● ●

Key start switch with electric fuel shutoff

● ●

Electronic engine throttle control

▲ ▲

Alternator air prescreener

Cooling

● ●

Engine coolant rated –34 deg. F (–37
deg. C)

● ●

Hydraulically driven, front-mounted suction-
type cooling fan

● ●

Radiator, heavy-duty, 5 fins per in.

● ●

Transmission oil cooler with hydraulically
driven cooling fan

● ●

Transmission cooler rated 5 fins per in.

● ●

Hinged, reinforced radiator guard

▲ ▲

Reversing fan drives available for engine
and hydraulic cooling systems

Powertrain

● ●

Dual-path hydrostatic transmission

● ●

Automatic load sensing for speed and
power management

● ●

Automatic-tracking steering control with
single-lever steering, direction/speed
control with counter-rotation

● ●

Infinite speed control; speed-in-grip with
fingertip speed control; dealer-selectable
transmission operating parameters

● ●

Double-reduction final drives with wet
multi-disc brakes

● ●

Integral final-drive seal protection

● ●

Primary and secondary service brakes

▲ ▲

Engine air dual-stage precleaner with
debris screen

Hydraulics

● ●

Load-sensing proportional flow pump

● ●

68 gpm (258 L/min.) pump flow

Hydraulic/transmission oil reservoir with
service shutoff, 49.9 gal. (189 L)

Hydraulic/transmission oil reservoir with
service shutoff, 55.5 gal. (210 L)

● ●

Pilot-pressure control system

● ●

Two-function hydraulic valve with quick-
drop blade feature; single-lever blade
control compatible for additional functions

● ●

20/5-micron replaceable dual-stage filter
element

950J 1050J

Hydraulics

(continued)

● ●

“O”-ring seal connectors

● ●

Hydraulic diagnostic ports

Electrical

● ●

24-volt system

● ●

80-amp alternator

● ●

Dual 1,000-CCA batteries

● ●

Circuit breakers

● ●

Positive-terminal battery covers

● ●

Electrically activated battery

● ●

Master disconnect

● ●

Backup warning alarm

● ●

Cab work lights (6), front (4) and rear (2)

▲ ▲

Additional grille-mounted front lights (2)

▲ ▲

Additional lift-cylinder lights (4)

▲ ▲

Additional rear cab-mounted lights (2)

▲ ▲

JDLink™

Undercarriage

● ●

Oscillating track frames

● ●

Heavy-duty, sealed and lubricated track
chain

● ●

Hydraulic track adjusters with dirt cover

● ●

Front idler and sprocket chain guides

● ●

Integrated track frame cover

● ●

Standard track frame, 78-in. (1980 mm)
gauge

Frame, 86-in. (2180 mm) gauge

Extreme-duty grouser shoes, 22 in.
(560 mm)

Extreme-duty grouser shoes, 24 in.
(610 mm)

▲ ▲

Extreme-service grouser shoes, 26 in.
(660 mm)

Moderate-service grouser shoes, 26 in.
(660 mm)

Extreme-service grouser shoes, 28 in.
(710 mm)

Moderate-service grouser shoes (LGP),
32 in. (812 mm)

Moderate-service grouser shoes (LGP),
36 in. (914 mm)

Operator Station

● ●

Modular-design ROPS/FOPS isolation-
mounted cab with left and right access

● ●

Heater (35,000 Btu) and air conditioning
(28,000 Btu)

● ●

Pressurized and filtered ventilation with
3-speed blower

● ●

Front windshield washer, and rear and
door window wipers

● ●

Dome light; rubber floor mats; interior-
mounted rearview mirror; built-in oper-
ator’s manual storage compartment with
manual; cup holder

● ●

Slip-resistant steps and ergonomically
located handholds

● ●

Comfort air suspension fabric seat with
adjustable armrests, backrest, height,
weight, and fore-aft

950J 1050J

Operator Station

(continued)

● ●

Seat belt, 2 in. (50 mm), with retractor

● ●

Electronic monitor system with audible
and visual warning for park brake; hydro-
static transmission pressure; engine air
filter restriction; hydraulic/transmission
filter restriction; low alternator voltage;
final-drive seal leak indicator; transmis-
sion selected speed indicator

● ●

Indicators for engine rpm and hydraulic/
hydrostatic oil temperature

● ●

Gauges, electric, illuminated for engine
oil pressure; engine coolant temperature;
fuel gauge; hour meter

● ●

Radio prepared and 12-volt/10-amp
power port

▲ ▲

AM/FM radio

▲ ▲

Powered cab air-filtration system

▲ ▲

Tank guard

Overall Vehicle

● ●

One-piece unitized mainframe

● ●

On-board cab-tilt system for full access
to hydrostatic motors

● ●

Reinforced engine bottom guards

● ●

Rear retrieval hitch

● ●

Heavy-duty hinged bar-type grille

● ●

Locking vandal protection for perforated
engine-access doors, and hydraulic- and
transmission-access door

● ●

Storage compartments (2)

Attachments

Semi-U blade with standard cutting
edges, 145 in. (3690 mm), 9.43 cu. yd.
(7.2 m

3

) (standard and LT)

Semi-U blade with standard cutting
edges, 178 in. (4520 mm), 7.86 cu. yd.
(6.0 m

3

) (LGP)

Semi-U blade with standard cutting edges
and cupped end bits, 159 in. (4030 mm)

U blade with standard cutting edges and
cupped end bits, 170 in. (4318 mm)

▲ ▲

Dual-function hydraulic controls and
plumbing

▲ ▲

Single-function hydraulic controls and
plumbing

▲ ▲

Dual blade-tilt cylinder for power pitch
and tilt

▲ ▲

Push plates, blade liners, and end bits

▲ ▲

Multi-shank ripper

Single-shank ripper

▲ ▲

Rear counterweight with drawbar (cannot
be used with ripper)

▲ ▲

Rigid heavy-duty drawbar (cannot be
used with rear counterweight or ripper)

▲ ▲

Rock guards

950J / 1050J CRAWLER DOZERS

Key:

Standard equipment

Optional equipment

*See your John Deere dealer for further information.

Vertis QCA

1300 19th Street, Suite 200

East Moline, IL 61244

Cyan

Magenta

Yellow

Black

DKA9501050J Page 20

DKA9501050J_SPECS 4/10/07 2:55 PM Page 20

Advertising
This manual is related to the following products: