JVC VN-C11 - Manual (Page 27)

27
1
6
2 3 4 5
[V.Networks Controller] can be used to select the camera, record and playback the
camera images etc.
(The Controller screens are identical with those for other V.Networks models. Certain
functions are not available for VN-C11.)
Operations with V.Networks Controller
1
Camera
Displays the name of the connected camera.
It is also possible to select the camera using
the
pull down menu.
2
PLAY
Select the file saved in 4 and replay. Select
this button too for replaying a recorded file with
an alarm activated.
3
STOP
Stops recording.
4
REC
When this is selected, recording starts. The
recorded files are saved under the name
shown in 1. During recording, the display
[Recording in progress] appears in 1. The
display [REC] will also appear on the displayed
image.
5
SNAPSHOT
Saves only one frame of the image being
displayed.
6
SIZE
Reduces the size of the [V.Networks Controller]
screen. (See below.)
Not available for VN-C11.
Reduced screen
1
Press here to enlarge.
Camera
Operations (Step 5 Operations with V.Networks Controller)
For details, refer to the PDF instruction manual inside the supplied CD-ROM.
VN-C10_E_25-32.pm6e 03.4.24, 10:01 AM 27