Sharp PG-C20XU - Manual (Page 14)

E-13
Setup & Connections
When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or
Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.
• Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.
Connecting the Projector
Connecting other compatible computers
“Plug and Play” function
• This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible
computer will communicate their setting requirements, allowing for quick and easy setup.
• Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.
• The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer.
Connecting the Projector to Video Equipment
You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual
equipment.
CAUTION
• Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the
equipment being connected.
Connecting a video source (VCR, laser disc player, DTV decoder or DVD player)
using the standard video input
1 Connect one end of the S-video cable to the S-VIDEO
INPUT 2 terminal, or one end of the video cable to the
VIDEO INPUT 3 terminal on the projector and the video
output terminal on the video source.
2 To use the built-in audio system, connect the red and
white RCA connectors to the corresponding red and
white AUDIO INPUT terminals on the projector and the
audio output terminals on the video source.
The S-VIDEO INPUT 2 terminal uses a video signal system
in which the picture is separated into a color and a
luminance signal to realize a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT 2 terminal on
the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output terminal, use
the composite video output terminal.
1 Video cable (sold separately)
2 Audio cable (sold separately)
To audio output terminals
To video output terminal
To S-video output terminal
S-video cable (sold separately)
Projector
VCR,
Laser disc player,
DTV decoder or
DVD player
L R
AUDIO INPUT INPUT 3 INPUT 2
S-VIDEO VIDEO (S-VIDEO, VIDEO INPUT)