Glossary, Compatibility, With – Sharp PG-C20XU User Manual
Page 51: Een and, Composite sync, Signals for, Active digital keystone correction, Intelligent compression, And expansion, Xga resolution
E-50
Appendix
Active digital keystone correction
Corrects keystone distortion caused when the projected image is not perpendicular to the screen. This method provides not
only horizontal correction, but vertical as well, thus maintaining the original 4:3 aspect ratio and eliminating jag lines.
Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4 : 3. There are also wide
images with an aspect ratio of 16 : 9 and 21 : 9.
Optimizes projected computer images by automatically adjusting certain characteristics.
Initial setting image projected when no signal is being input.
Clock adjustment is used to adjust vertical noise when clock level is incorrect.
Ability to use with various image signal modes.
Signal combining horizontal and vertical sync pulses.
Mode that projects images in their native resolution.
Function to freeze a moving image.
Offers richer image viewing with dark scene phase and contrast correction according to image and room brightness. Three
gamma settings are available.
Graphical User Interface. User interface with graphics that allow easier operation.
Intelligent compression and expansion
High quality resizing of lower and higher resolution images to fit the projector’s native resolution.
Digitally zooms in on a portion of an image.
Function with toggle switch to control the quantity of projected light. Select “ON” or “OFF” to decrease or increase
brightness, power consumption and fan noise.
Portable Document Format. Documentation format used to transfer text and images from the CD-ROM.
Phase shift is a timing shift between isomorphic signals with the same resolution. When phase level is incorrect, the
projected image typically displays horizontal flicker.
Function to control the projector from the computer by using the RS-232C ports on the projector and computer.
Video signal mode of a computer which overlaps horizontal and vertical sync signal to green color signal pin.
Function to operate the mouse control of a computer with the supplied remote control.
Resolution with 1,024
ן 768 pixels that uses the signal of an IBM/AT compatible (DOS/V) computer.
Glossary