Sharp PG-C20XU - Manual (Page 21)

E-20
Operation
Setting up the Screen
Projector
Digital Keystone Correction
Remote control
• When the image is distorted due to the projection
angle, the digital keystone correction function allows
you to correct it.
• The digital keystone correction can be made by
pressing KEYSTONE, or by setting “Keystone”
correction in the GUI menu.
Using the GUI menu
1 Press MENU.
2 Press
∂ /ƒ to select “Options”, and then press
ENTER.
3 Press
∂
/ƒ to select “Keystone”, and then press
ENTER.
4 Press
∂ /ƒ to move the mark to the desired
setting.
5 To exit from the GUI, press MENU.
• To reset the keystone setting, press BACK.
• Straight lines and the edges of the displayed image may
appear jagged, when adjusting the keystone setting.
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENU
AUTO SYNC
2, 3, 4
2, 3
1, 5
(GUI) On-screen Display
Projector Remote control
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENU
AUTO SYNC
1
Using the KEYSTONE buttons
1 Press KEYSTONE to adjust the setting.