Installation, English, Fm am – Sherwood R-525 User Manual
Page 3
INSTALLATION
Please make the following connections (where applicable).
Notes!
– SWITCH OFF THE RECEIVER BEFORE MAKING ANY
CONNECTIONS.
– Do not connect the receiver to the wall socket when
making connections.
– Be sure to connect the white plugs to the L (left) and the
red plugs to the R (right) jacks when making connections.
CONNECTIONS
1. FM INDOOR ANTENNA
Connect the supplied antenna to the FM antenna
terminals, as shown.
Change the position of the antenna until you get the best
reception of your favorite FM stations.
FM OUTDOOR ANTENNA
A 75
Ω outdoor FM antenna may be used to further
improve the reception.
Disconnect the indoor antenna before replacing it with the
outdoor one.
2. AM LOOP ANTENNA
Tune in your favorite AM station and position the loop
antenna for best reception. Try other stations and find the
position that gives best overall reception. When this unit
is mounted in a rack or placed on a shelf with insufficient
space behind, hang the antenna on a wall in the direction
which gives best reception.
3. SYSTEM GROUND TERMINAL
When using a PHONOGRAPH, connect the ground lead
from your PHONOGRAPH to this terminal.
4. AUDIO IN/OUT
– PHONO IN – input jacks for connecting a phonograph.
Connect these jacks to the output jacks of a
phonograph with MM (Moving Magnet) type cartridge.
– CD IN – input jacks for connecting a Compact Disc
player.
Connect these jacks to the OUTPUT jacks of the CD
player.
– AUX/TV IN – input jacks for connecting the fixed audio
output jacks of a TV set or any other source you want to
hear; an additional CD player or a cassette deck, etc.
CONNECTIONS
– TAPE 1 PLAY/REC AND TAPE MON 2 PLAY/REC –
PLAY and REC jacks for connecting a cassette deck, a
Digital Compact Cassette deck or another digital
recording device.
Connect the PLAY jacks to the PLAY or LINE OUTPUT
jacks of the deck.
Connect the REC jacks to the REC or LINE INPUT
jacks of the deck.
These TAPE 2 MONITOR PLAY/REC jacks may also
be connected to the LINE OUTPUT/INPUT jacks of an
audio processor such as an optional graphic equalizer
or a Digital Signal Processor.
– LDP IN – input jacks for connecting the audio output jacks
of a Laser Disc Player.
Connect these jacks to the AUDIO OUTPUT jacks of
LDP.
– VCR 1 PLAY/REC – PLAY(input) and REC(output) jacks
for connecting the audio OUTPUT and INPUT jacks of a
Hi-Fi stereo VCR.
Connect the PLAY jacks to the AUDIO PLAY or
OUTPUT jacks of the VCR.
Connect the REC jacks to the AUDIO REC or INPUT
jacks of the VCR.
Note : The audio and video inputs and outputs of the VCR
must be connected to allow the VCR 2/CAMCORDER inputs
on the front of the receiver to be used for recording input.
3
ENGLISH
Important note for connecting equipment that does
not have IN/OUT markings on the input and output
jacks:
R-525 Device to be connected, e.g. cassette deck.
PLAY
PLAY or OUT
REC
REC or IN
R
L
R
DIGI
LINK
DIGI
LINK
L
MODEL NO. R-525
AUDIO/VIDEO RECEIVER
GND
PHONO
AUX/TV
AUX/TV
FRONT SPEAKERS A (8~16 )
FRONT SPEAKERS A (8~16 )
FRONT SPEAKERS B (8~16 )
FRONT SPEAKERS B (8~16 )
CENTER
SPEAKER(8 )
CENTER
SPEAKER(8 )
R
R
L
L
R
R
L
L
R
R
L
L
SUB
WOOFER
PRE-OUT
(MONO)
SUB
WOOFER
PRE-OUT
(MONO)
REAR
PRE-OUT
REAR
PRE-OUT
MAIN
IN
MAIN
IN
FRONT
PRE-OUT
FRONT
PRE-OUT
CENTER
PRE-OUT
(MONO)
CENTER
PRE-OUT
(MONO)
MODEL NO. R-525
AUDIO/VIDEO RECEIVER
AC INPUT
~120V /60Hz
3A
AC INPUT
~120V /60Hz
3A
GND
PHONO
MULTI
ROOM
MULTI
ROOM
PLAY
PLAY
VCR1
VCR1
REC
REC
PLAY
PLAY
REC
REC
PLAY
PLAY
PLAY
PLAY
PLAY
PLAY
OUT
OUT
TAPE-1
TAPE-1
TAPE-2/MON
TAPE-2/MON
LDP
LDP
CD
CD
MONITOR
MONITOR
REC
REC
+
-
+
-
+
+
+
+
-
-
-
-
R
L
R
R
R
L
L
L
+
+
+
+
-
-
-
-
FM
FM
AM
(INDOOR ANTENNA)
(OUTDOOR ANTENNA)
VIDEO
VIDEO
VIDEO
VIDEO
AC OUTLET
SWITCHED
TOTAL 1A MAX
OR 100W MAX
AC OUTLET
SWITCHED
TOTAL 1A MAX
OR 100W MAX
1 7
6
8
9
10
13
2
14
5
12
11
4
3
SUPPLIED ADAPTOR
300 ohm
feeder
ANTENNA
ANTENNA
ANTENNA
AM
LOOP
AM
LOOP
FM
75
FM
75
R
L
R
L
REAR SPEAKERS (4 )
REAR SPEAKERS (4 )
+
+
+
+
-
-
-
-