Sherwood R-525 - Manual (Page 7)

REMOTE FUNCTION OVERVIEW
AMPLIFIER
1 1.POWER – for power control of this receiver or system.
(as described in amplifier chapter titled "POWER
ON/STANDBY")
1 2.SLEEP – for setting a time period after which the system
will automatically be switched to standby.
1 4.SYSTEM DISPLAY – for dimming displays of Sherwood
components connected by DIGI LINK II or III.
12.INPUT SELECTORS
35.MUTE – for muting the sound.
SURROUND PROCESSOR
28.SURROUND MODE
PRO LOGIC, 3 STEREO, THEATER, HALL,
STADIUM, OFF – For selecting the different surround
modes.
29.CENTER MODE – for selecting the desired center mode
when in Dolby Pro Logic or Dolby 3 Stereo mode.
30.TEST TONE – for checking the output level of the front,
center and rear speakers.
31.DELAY TIME – for adjusting the delay time of the rear
channel.
32.REAR LEVEL / – for adjusting the rear level
(in Dolby Pro Logic, Theater, Hall, Stadium mode)
33.CENTER LEVEL / – for adjusting the center level
(only in normal mode or wide mode).
34.MASTER VOLUME / – for adjusting the volume.
36.SUBWOOFER LEVEL / – for adjusting the
subwoofer level.
TUNER
1 3.PRESET SCAN – for scanning the stations memorized.
1 5.0-9 DIGITS – for selecting stations in frequency direct
mode and for preset tuning in tuner mode.
CASSETTE DECK
15. – for stopping recording/play.
16. – for pausing recording/play.
17.DECK SELECTOR A, B – for selecting deck A or B.
18. – for recording.
19. – for starting forward side play.
20. – for starting reverse side play.
21. – for winding the tape forward.
22. – for winding the tape reverse.
In the DIGI LINK III remote control system, if pressing PLAY
etc. on CD or Deck, CD or TAPE 2 Monitor is selected
automatically without selecting the input and PLAY, etc.
starts.
In this case, to listen to TAPE 1, select the TAPE 1.
COMPACT DISC PLAYER
1 5.0-9 DIGITS – for track selection, press desired button
among 10 buttons on the remote control and for disc
selection, select disc No.(1~5) within 2 sec. after
pressing the DISC button.
1 6.DISC (CD changer only) – for disc selection.
1 7. – to begin play.
1 8. – to stop play/clearing a program.
1 9. – for pausing play.
10. – for skipping backward and forward.
11. – for searching backward and forward.
13.INTRO – to preview each track only for 10 seconds.
14.REPEAT A <> B – to play a specific passage repeatedly.
EQUALIZER
23.PRESET – for selecting equalizer pattern.
24.USER – for adjusting equalizer pattern as desired.
25.FILE – for selecting desired equalizer pattern in the
preset or user mode.
26.TAPE M – for monitoring the sound of recording or
playback of cassette deck.
27.DISPLAY – for selecting equalizer display.
7
ENGLISH