Preparing the receiver and the remote, Connecting the ac power cord, Performing initial setup operations – Sony STR-DG700 User Manual

Page 29: Press ? / 1 to turn off the receiver, Hold down ? / 1 for 5 seconds, Gettin g sta rted, Connect the ac power cord to a wall outlet

Advertising
background image

29

GB

C:\Documents and
Settings\pc13\Desktop\JC060016_2680065111DG700_GB\2680065111\GB03CON_STR-
DG700-CEL.fm

masterpage: Right

STR-DG700

2-680-065-11 (1)

Gettin

g

Sta

rted

5: Preparing the receiver
and the remote

Connect the AC power cord to a wall outlet.

* The configuration, shape and number of AC

outlets will vary according to the area code of the
receiver you purchased.

Notes

• Install this system so that the power cord can be

unplugged from the wall socket immediately in the
event of trouble.

• The AC OUTLET(s) on the rear of the receiver is a

switched outlet, which supplies power to the
connected component only while the receiver is
turned on.

• Make sure that the total power consumption of the

component(s) connected to the receiver’s AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.

Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.

1

Press ?/1 to turn off the
receiver.

2

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears on the
display alternately.

3

Press MEMORY/ENTER.

After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, EQ, SUR,

TUNER, AUDIO, VIDEO and
SYSTEM menus.

• The sound field memorized for each

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset

stations.

• MASTER VOLUME is set to “VOL

MIN”.

• Input is set to “DVD”.

Connecting the AC power cord

SURROUND BACK

CENTER

+

FRONT A

R

L

+

EAKERS

FRONT B

R

L

+

AC OUTLET

AC power cord

To the wall outlet

AC OUTLET*

Performing initial setup
operations

?/1

AUTO CAL MIC

SPEAKERS

(OFF/A/B/A+B)

PHONES

MEMORY/

ENTER

SUR BACK
DECODING

2CH

SLEEP

DIMMER

A.F.D.

MOVIE

MUSIC

MULTI CHANNEL DECODING

TUNING MODE

DISPLAY

INPUT MODE

INPUT SELECTOR

TUNING

+

MULTI CH IN

DIRECT

MASTER VOLUME

VIDEO 3 IN/PORTABLE AV IN

VIDEO

L AUDIO R

DIGITAL(OPT)

1,2

3

GB01COV_STR-DG700-CEL.book Page 29 Wednesday, February 15, 2006 4:11 PM

Advertising