Setting options of easy mode, White balance, Mount – Sony IPELA SNC-P1 User Manual
Page 26: Blue led, Brightness, Image quality, Image size, Microphone, Date & time setting, E-mail (smtp)
A
d
mini
s
tra
ting
t
he
Came
ra
Basic Operations of Easy mode
26
Setting Options of Easy mode
Displays the Advanced mode menu (page 28).
White balance
Select the white balance mode.
Auto, Indoor or Outdoor can be selected.
Mount
The image can be displayed upside down.
Select Desk top when you use the network camera on
desktop, and select Ceiling when you use it fixed to the
ceiling. You can always watch the proper image
regardless of its position.
Blue LED
You can select the brightness of the blue LED on the top
of the network camera.
Bright, Dark or Off can be selected.
Brightness
You can adjust the brightness of the image sent from the
network camera in eleven levels.
Click the button of the brightness you want to select. The
button on the left side is the darkest (Dark), and the
button on the right is the brightest (Bright).
Image quality
You can select the quality of the image sent from the
network camera.
Usually select Normal. To give priority to the
transmission speed and to watch a smooth image, select
Low. To give priority to the image quality, select High.
Note
According to the line condition, smooth image may not
be obtained even if you select Low.
Image size
You can select the image size sent from the network
camera.
640 × 480 (VGA), 320 × 240 (QVGA) or 160 × 120
(QQVGA) can be selected.
Microphone
Select whether you send the audio from the built-in
microphone or from the m microphone input
connector. Select On to send the audio from this
network camera microphone.
Note
When you change the Microphone setting, click
Refresh of the Web browser to reflect the change in the
opening main viewer page.
Date & time setting
When you click Setting, date and time of the camera is
set to suit those of the computer.
Note
The setting time may not accord with the exact time
according to the network environment.
e-Mail (SMTP)
This is the setting for sending an e-mail with an attached
image file of the monitor. Click e-Mail (SMTP) and the
“Easy mode (e-Mail)” setting mode menu appears.
(page 27)