SoundFreaq SFQ-01 - Manual (Page 12)

.11.
Press the Button
Functions
Unit Remote Control
Next track/fast forward (press and hold).
Previous track/rewind (press and hold).
/
Notes for Caring Your iPhone/iPod:
 iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
 iPhone is a trademark of Apple Inc.
 We are not responsible for any loss of or
damage to iPhone/iPod that might result
from the use of this product.
 Sound distortion may occur when playing back
audio sources with high recording levels.
When distortion occurs, it is recommended
to turn off the equalizer of the iPhone/iPod.
For information on operating the iPhone/iPod,
see the iPhone/iPod instruction manual.
 If you do not turn on the power of this unit
and only connect the iPhone/iPod to this
unit, power may be supplied to the iPhone/iPod.
 "Made for iPod" and "Made for iPhone" and
"Made for iPad" mean that an electronic
accessory has been designed to connect
specifically to iPod/iPhone/iPad and has
been certified by the developer to meet
Apple performance standards.
 Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Charging an iPhone/iPod
The iPhone/iPod is charged while it is set on the
unit when the unit is powered on.
 The unit does not support iPod 3G (10/15/20/
30/40GB) charging mode.
 Make sure the AC adapter is connected to
the unit.
 The iPhone/iPod is charged regardless of the
sound source selected on the unit.
 See the iPhone/iPod instruction manual about
the details of iPhone/iPod charging.
 The connector plug is protected with a cover
when it is first purchased. Please remove the
cover before operating the unit.
 This unit can only play the iPhone/iPod audio.
You can use the iPhone/iPod video function
and hear the audio but cannot play the
video.
 Do not carry the System with iPhone/iPod
connected. You might drop it down or it
might cause damages to the connector part.
 Do not touch or hit the iPhone/iPod terminal
pins or the connector pins directly. It might
cause damages to the connector part.
 If the iPhone/iPod does not play correctly,
please update your iPhone/iPod software to
the latest version. - For details about
updating your iPhone/iPod, check on the
Apple web site <http://www.apple.com>.
Start/Pause playback.
Hold this button to switch the iPod to sleep mode.