SMC Networks SMCWEBT-G - Manual (Page 18)

H
ARDWARE
D
ESCRIPTION
6
System Requirements
Before you install the Wireless AP, be sure you have met the
following requirements:
• An AC power outlet (100~240 V, 50~60 Hz)
• An available RJ-45 (UTP) port on an Ethernet hub or switch
• 802.11b/g compliant wireless Ethernet adapters with TCP/IP
protocols installed
• TCP/IP network protocol installed on each PC that needs to
access the Internet
• A web browser, such as Microsoft Internet Explorer 5.5 or
above installed on one PC at your site for configuring the
Wireless AP