Sony PEG-S300 - Manual (Page 172)

172
Beaming problems
I cannot beam data to another Palm OS PDA.
t Confirm that your Sony handheld and the other Palm OS PDA are
between ten centimeters (approximately 4”) and twenty centimeters
(approximately 8”) apart, and that the path between the two handhelds
is clear of obstacles. Beaming distance to other Palm OS PDAs may be
different.
t Move your Sony handheld closer to the receiving handheld.
When someone beams data to my Sony handheld, I get a
message telling me it is out of memory.
t Your Sony handheld requires at least twice the amount of memory
available as the data you are receiving. For example, if you are
receiving a 30K application, you must have at least 60K free.
t Perform a soft reset. See “To reset (soft reset)” for more information.
Recharging problems
When I place my Sony handheld in the cradle, it does not
recharge.
t Confirm that your Sony handheld is well seated in the cradle.
t Confirm that your recharger is plugged into an AC outlet that has
power.
t Confirm that you are using the cradle and AC adapter that came with
the device.
t Confirm your Sony handheld is turned off or it will not fully charge.