Sharp VC-MH835HM - Manual (Page 38)

36
www.sharp.co.uk/support
CUSTOMISED INSTALLATION
CONNECTING A SATELLITE RECEIVER/CABLE BOX
TO YOUR VCR
1. Disconnect the VCR plug from the
mains socket.
2. Connect your existing aerial/satellite
cable to the
AERIAL IN socket on the
satellite receiver.
3. Connect the AERIAL OUT socket on
the satellite receiver to the AERIAL IN
socket on the VCR with an RF
connection cable (not supplied).
OR:
Connect your Satellite Receiver or
decoder to the VCR using a scart
lead to the LINE 2 IN/DECODER
socket on the VCR.
4. Connect your TV to the VCR using the
supplied RF connection cable, i.e.
connect the VCR
AERIAL OUT
socket to the TV AERIAL IN socket.
5. Reconnect the VCR plug to the mains
socket. The VCR is now in STANDBY
mode.
Optional: SCART (not supplied). If
you have a scart lead connect it to
your TV and LINE 1 IN/OUT socket
on the VCR.
- The advantage of a Scart
connection is improved picture and
sound quality during playback.
LINE1(I)IN /OUT SON/VIDEO (L1/I)
A2230
LINE2(II)IN/DECODER CANAL PLUS/L2(II) AUDIO OUT SORTIE SON
L G R D
AERIAL IN ENTREE ANTENNE
AERIAL OUT SORTIE ANTENNE
LINE1(I)IN /OUT SON/VIDEO (L1/I)
A2230
LINE2(II)IN/DECODER CANAL PLUS/L2(II) AUDIO OUT SORTIE SON
L G R D
AERIAL IN ENTREE ANTENNE
AERIAL OUT SORTIE ANTENNE
LINE1(I)IN /OUT SON/VIDEO (L1/I)
A2230
LINE2(II)IN/DECODER CANAL PLUS/L2(II) AUDIO OUT SORTIE SON
L G R D
AERIAL IN ENTREE ANTENNE
AERIAL OUT SORTIE ANTENNE
TINS-A082UMN1.book Page 36 Monday, November 4, 2002 2:33 PM