Sony UNA-EN1 - Manual (Page 24)

8-GB
Parts identification
When connecting the USB-Ethernet adaptor, do so correctly by checking
the shape of the connectors.
USB connector : For connection to a USB compatible camcorder.
RJ-45 connector : For connection to the LAN cable.
Useable LAN cables
An unshielded twist pair straight cable (UTP)
• Category 3, 4, 5 with 10BASE-T
• Category 5 with 100BASE-TX
LINK Lamp
The status of the lamp indicates the communication status of the USB-
Ethernet adaptor :
MAC address
USB cable
RJ-45 connector
USB connector
Lamp Meaning
10BASE-T communicating, no data transmission
10BASE-T communicating, transmitting data
100BASE-TX communicating, no data transmission
100BASE-TX communicating, transmitting data
not communicating
Orange
Green
–
On
Flashing
On
Flashing
Off
LINK lamp
A cable modem may require the
MAC address to be set. In that
case, record the entry data (letters
and numbers) written on this
label.
Rear
Mac address
(label)