Siemens 2010 - Manual (Page 3)

– 3 –
- English -
19.04.2000 euroset 2010,IM1, A31008-E2010-B100-2-3S19 2010-
General note on saving phone settings
Various telephone setting have to be confirmed with the set key " if they
are to be permanently available.
To cancel the setting procedure (e.g. after an incorrect entry) without sav-
ing, replace the handset instead of pressing
" . The original setting is then
unchanged.
Saving call numbers
❏ Saving repertory numbers
You can save up to 20 call numbers using the two levels of the repertory
keys.
You can store dial pauses of 3 seconds by pressing / (a pause should not
occur as the first element in a call number).
Tip: Key sequences for special functions on private PABXs and public tele-
phone systems can also be stored on the repertory keys.
❏ Saving with the notebook function
While a call is in progress you can save (note) the number you have dialled
or have been told during the call under a repertory key. However this re-
quires that at least one repertory key is free. This is why we recommend
reserving one key for this function and labelling it "Note".
Saving a dialled call number:
or
Saving a call number which you have been told during the call:
>" Lift the handset, then press the set key.
(Also press
a for the 2nd storage level.)
K Press the repertory key under which the repertory
call number is to be stored.
J Enter the call number to be stored (max. 32 digits).
"< Press the set key then replace the handset.
" K
Press the set key followed by the repertory key
under which the call number is to be noted.
/ Press the redial key to note the d dialled call number.
J Enter the call number which appears on your display
while the call is in progress.
" Press the set key to confirm the call number entered.