Sony BRAVIA 4-115-568-13(1) - Manual (Page 31)

31 GB
Using
MENU F
uncti
ons
Media Receiver Set-up
Auto Start-up Starts the “first time operation menu” to select the language, country and location,
and tune in all available digital and analogue channels. Usually, you do not need to
do this operation because the language and country will have been selected and
channels already tuned when the unit was first installed (page 7). However, this
option allows you to repeat the process (e.g., to retune the unit after moving house,
or to search for new channels that have been launched by broadcasters).
Screen Settings Screen Format See “To change the screen format manually” on page 21.
Auto Format Automatically changes the screen format according to the
input signal. To keep your setting, select “Off”.
Display Area Adjusts the picture display area in 1080i/p and 720p sources
when “Screen Format” is set to “Wide”.
Auto During digital broadcasts, displays
pictures in accordance with the settings
recommended by the broadcast station.
Full Pixel Displays pictures in their original size.
Normal Displays pictures in their recommended
size.
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture when “Screen
Format” is set to “Smart”, “Zoom” or “14:9”.
Vertical Size Adjusts the vertical size of the picture when “Screen Format”
is set to “Smart”, “Zoom” or “14:9”.
PC Settings Screen Format Selects a screen format for displaying input from your PC.
Full 1 Enlarges the picture to fill the vertical
display area, keeping its original
horizontal-to-vertical aspect ratio.
Full 2 Enlarges the picture to fill the display
area.
Reset Resets the PC screen settings to the factory settings.
Auto Adjustment Automatically adjusts the display position, phase and pitch of
the picture when the unit receives an input signal from the
connected PC.
z
• “Auto Adjustment” may not work well with certain input
signals. In such cases, manually adjust “Phase”, “Pitch” and
“Horizontal Shift”.
Phase Adjusts the phase when the screen flickers.
Pitch Adjusts the pitch when the picture has unwanted vertical
stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Power
Management Switches the unit to standby mode if no signal is received for
30 seconds in the PC input.
(Continued)