Sony BRAVIA 4-115-568-13(1) - Manual (Page 32)

32 GB
AV Set-up AV Preset Assigns a name to any equipment connected to the media
receiver. The name will be displayed briefly on the screen
when the equipment is selected. You can skip an input source
that is not connected to any equipment.
1
Press F/f to select the desired input source, then press
.
2
Press F/f to select the desired option below, then press
.
-, CABLE, SAT,
VCR, DVD/BD,
GAME, AUDIO
SYSTEM, CAM,
PC Uses one of the preset labels to assign a
name to connected equipment.
Edit: Creates your own label.
1
Press F/f to select the desired letter
or number (“_” for a blank space),
then press
g.
If you input a wrong character
Press
G/g to select the wrong
character. Then, press F/f to select
the correct character.
2
Repeat the procedure in step 1 until
the name is completed.
3
Select “OK”, then press .
Skip Skips an input source that is not
connected to any equipment when you
press
F/f to select the input source.
Speaker Turns on/off the monitor’s internal speakers.
TV Speaker The monitor speakers are turned on in
order to listen to the TV’s sound through
the monitor speakers.
Audio System The monitor speakers are turned off in
order to listen to the TV’s sound only
through your external audio equipment
connected to the audio output sockets.
When connected with “Control for
HDMI” compatible equipment, you can
turn the connected equipment on
interlocked with the monitor. This setting
must be made after connecting the
equipment.
Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast.
Stereo/Mono For a stereo broadcast.
A/B/Mono For a bilingual broadcast, select “A” for sound channel 1, “B”
for sound channel 2, or “Mono” for a mono channel, if
available.
z
• If you select other equipment connected to the unit, set “Dual Sound” to
“Stereo”, “A” or “B”.
IR Blaster Set-up See page 9 for the “IR Blaster Set-up” setting.