SINGER 14T968DC User Manual

Page 65

Advertising
background image



5. Continue to thread points 4-8. Slip the thread into the middle slot of the

thread guide . Go over the take up lever . Continue by slipping the

thread into the middle slot of the thread guides and .

6. Before threading the eye of the needle, make sure the thread is behind

the thread guide located on the bottom of the needle clamp.


















7. Thread the eye of the left needle .










8. Draw about 4 inches of the thread through the needle eye towards the back

of the machine.

9. Place the thread to the back, under the Presser Foot.

Three-Thread Overlock (wide) page 4

Advertising
This manual is related to the following products: