SINGER 14U236B User Manual
SINGER Sewing machines
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- 14
- 14U286B/236B
- CONTENTS
- 1. Selection of stitches
- 2. Handy reference chart
- 3. Principal parts
- 4. Preparation for sewing
- 5. Preparation for threading
- 6. How to sew two-thread overlook and overedge
- 7. How to sew three-thread standard overlook, fiatlock and wrapped edge overlook
- 8. How to sew three-thread ultra-stretch mock safety stitch
- 9. How to sew four-thread ultra-stretch mock safety stitch
- 10. How to adjust stitch length
- 11. How to adjust overedge seam width
- 12. How to do rolled hemming
- 13. Differential feed
- 14. Free arm sewing (tubular work)
- 15. Seam guide lines
- 18. Two-thread flatlock stitch
- 20. Braiding by chaining-off
- 22. Reinforced (tapes) overedge stitching (i4U286b)
- 23. Applying elastic
- 24. Turning square corners
- 25. How to replace stationary knife
- 26. How to exchange light bulb
- 27. How to adjust presser foot pressure
- 28. Lubrication
- 29. Reasons for poor stitches and how to make adjustment
- 30. Relationship between cloth, thread and needle
- 31. Accessories
- 32. Specification