How to sew – SINGER 14U236B User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Left looper thread wrapped rolled hem stitching (roiled hem variation).
• Correct thread tension
A beautiful seam can be obtained on hard-to-roll light
weight fabrics by this method of stitching.
Tension Dial
Blue
Green
Orange
Yellow
2.0
Spreader
2.0
Make minor adjustments to obtain even better thread tensions.
When needle thread is too loose or left
looper thread is too tight
When left looper thread is too loose
Needle thread
Topside
Left looper
thread
Underside
Turn needle thread tension dial (green) In
the (+) direction or left looper thread tension
. dial (yellow) in the (—) direction.
Needle thread
Topside
Left looper
thread
Underside
Turn left looper thread tension dial (yellow)
in the (+) direction.
4.
How to sew
Sewing
• Refer to “Chain off and test sew”on page 9.
• For rolled hemming, a better stitch quality can be obtained by pulling the fabric lightly in the
forward direction to give slight tension to the fabric.
• When starting to sew, hold chained off thread end lightly to prevent it from being sewn into the
seam.
• The minimum overedge seam width that can be obtained for rolled hem is approximately 1.5mm
because the cutting width can not be set below 3.5mm.
24