SINGER 14U236B User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(6) Correct thread tensions for 3-thread wrapped edge overlook.
Be sure the threads are correctly threaded otherwise
proper tension cannot be obtained.
Set each tension dial to settings shown below and test sew on a sample of your fabric.
• When using right needle for sewing normal width overedge seams, be sure to remove left needle.
Fabric
Light weight
Medium weight
Heavy weight
Tension Dial
Blue
Green
3.0
4.0
4.5
Orange
0.5
0.5
0.5
Yellow
7.0
8.0
8.5
• When using left needle for sewing wide
overedge seams, be sure to remove right
needle.
Fabric
Tension Dial
Blue
Green
Orange Yellow
Light weight
6.0
0
7.5
Medium weight
8.0
0
8.5
Heavy weight
8.5
0
8.5
Right needle
thread tension
dial (green)
Left needle
thread tension
dial (blue)
Right looper
thread tension
dial (orange)
Left looper
thread tension
dial (yellow)
Adjust thread tensions to suit your fabric making reference to table below. Make adjustments in
increments of no greater than half a number at a time.
r
When right looper thread is too
When left looper thread is too
When needle thread is too
loose.
loose.
loose
Needle /
Needle
thread /
thread
\
Right looper
\
Right looper
—
\
thread
Left Iqoper
Right looper
O^^Left looper
thread Left looper
thread
thread /
y thread
thread
Needle thread
Topside ^ ■
Underside
Topside Underside
Topside Underside
Turn right looper thread ten
Turn left looper thread ten
Turn needle thread tension
sion dial (orange) toward the
sion dial (yellow) toward the
dial (blue or green) toward the
(+) mark.
(+) mark.
(+) mark.
Or, turn right looper thread
Or, turn right looper thread
tension dial (orange) toward
tension dial (orange) toward
V
the (—) mark.
the (—) mark.
J
18