SINGER 14U236B User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(3a)
To thread the right needle
Thread right needle thread in the order © to ® as shown. (Green thread path) For easy thread
ing of needle ®, set movable knife in non-operating position.
Thread the right needle for standard 3.5mm stitch width
O
While
holding
thread
with
finger
wrap
thread
around
tension
disk
clockwise
till
caught
in
hook
and
pull
thread
down
to
mark
cert
ain
it
is
properly
locat
ed
in
between
the
tension
discs.
• Lower needle bar when
threading (6) and ©.
• Use tweezers to thread
needle eye(Q).
•
Draw about 5cm (2
inches) of thread from
needle eye.
Or (3b) Thread the left needle for 5.7mm width (blue path)(page 12)
o
Thread left needle thread in the order ©to (9) as shown. (Blue thread path) For easy threading
of needle ©, set movable knife in non-operating position. (See page 21 for setting movable knife
to non-operating position)
T7
While
holding
thread
with
finger
wrap
thread
around
tension
disk
clockwise
till
caught
in
hook
and
pull
thread
down
to
mark
cert
ain
it
is
properly
locat
ed
in
between
the
tension
discs.
• Lower needle bar when
threading © and ® .
• Use tweezers to thread
needle eye©.
•
Draw about 5cm (2
inches) of thread from
needle eye.