Sony VAIO VGF-HS1 - Manual (Page 10)

10
VGF-HS1 3-98-361-11(1)
Getting Started
Operation flow
Proceed with the following preparation flow to get started with using your Home Server.
1. Hardware connection and setup (See page 11 to 42).
1. Placing your Home Server
2. Connecting to a network
3. Connecting to a power source with the supplied AC adapter
4. Turning on your Home Server
Upon completion of the above, you can:

Use your Home Server as a network storage device.

Let DLNA devices access the content of your Home Server.

Take advantage of the One Touch Copy function.
For further information on each of the above, see page 37.
To use the following additional functions available through connection with a personal computer, you must
continue with the rest of the preparation. See page 43 for further information.

Back Up

Data Sync

Restore Tool
2. Software installation and initial setup (See page 43 to 47).
1. Installing software with the supplied CD-ROM disc
2. Completing the initial setup
Note
When you have recovered the personal computer that you use to connect to the Home Server, you must install the
software and complete the initial setup all over again.