Sony BW-RS101 - Manual (Page 14)

14
Connecting the Unit
C
h
a
p
ter
2
G
e
ttin
g
St
ar
te
d
Connecting the BW-RU101
Connect the unit to the host computer through a USB cable. You can use a USB
Hub to connect up to 127 USB devices. Because BW-RU101 supports hot-plug,
you can plug in, use, and unplug BW-RU101 without having to shut down the
host computer.
Note
Before connecting the unit, make sure that it is off.
1
Connect the USB cable to the USB connector of the unit.
2
Connect the AC power cord to the AC IN connector of the unit.
USB Cables
To achieve high transfer rate and stable operations, the length of the USB cables
should not exceed 5m.
Even though BW-RU101 is a hot-plug device, data may be lost when unplug the
USB cable, so confirm the following items before unplug the USB cable.
• Data saved to the disc is not accessed from an application or software.
• The BUSY indicator is off or lit green.
• The disc has been ejected. (Turning the unit off after ejecting the disc is
recommended.)