Sony BW-RS101 - Manual (Page 7)

7
Part Location and Function
Ch
ap
te
r 1
In
tro
d
u
c
tio
n
Part Location and Function
This section describes the parts of the “Professional Disc for DATA” units BW-
RS101 and BW-RU101 and gives an overview of their functions.
BW-RS101/BW-RU101 Front Panel
A Power indicator
Lights green when the unit is on.
B Slot cover
When inserting a disc, open this slot cover by pulling it toward you. After
inserting the disc, close the slot cover. The cover opens automatically when you
eject a disc, but you need to close it manually. see “Inserting a Disc” on page 20
for details.
C Busy indicator
Alternates between green and amber when the unit is reading or writing data. Do
not eject the disc when the indicator is amber.
D Emergency eject hole cover
In emergency only, remove this hole cover and then eject the disc. See “What to
Do when You Cannot Eject a Disc” on page 24 for details.
E Eject button
Press this button to eject a disc from the unit. You cannot use the eject button to
eject button to eject the disc when the unit is off.
Note
If write cache is used, pressing the eject button writes data in the cache memory
to the disc, and so it may take a while to eject the disc.
1 2 3 4 5