Sony KD-32NX200E - Manual (Page 19)

Digital features
17
OK
1
4
7
3
6
9
2
5
8
0
The Main menu
Installation
This option allows you to tune in programmes automatically or manually and to change
the order of the stored programmes.
1. Press the button, then press the BLUE button on the remote control to
display the Main Menu.
2. Press the V or v buttons to select ‘Installation’ then press the OK button to
display the Installation menu.
3. Press the V or v buttons to select your chosen item on the menu screen then
press the OK button to display the relevant sub menu.
Quick Tuning
This option will tune in all the recommended signals for your location.
Full Tuning
This option will tune in all the signals available. As this option may take some
time a menu is displayed showing the tuning progress.
Manual Tuning
With this option you can manually add channels to your TV.
1.
With the ‘Manual Tuning’ menu on display, enter the new programme
number for your chosen channel using the buttons 0 - 9. Press the OK
button to confirm.
2. The Manual Tuning programme list is displayed with your chosen
programme number highlighted. Press OK to confirm and display the
Search menu.
3. The search will begin from the channel number shown highlighted. If
you wish to change this to a channel number of your choice, press the
V
or v button or enter the number directly using the buttons 0 - 9. Press
the b button to make the ‘Select Search’ box active.
4. Press the V or v button to begin the search process. ‘Searching ...’
appears alongside the word ‘Status’ to indicate searching is taking
place. If no digital services are found on your chosen channel, the
channel number changes up or down automatically and the search
continues. Once all the services allocated to the channel have been
found, they are displayed in the ‘Services Found’ box.
5. Press the V or v button to highlight the service you wish to allocate to
the programme number selected in Step 1, then press the OK button to
return to the Manual Tuning programme list display.
Note:
Manual tuning allows you to add another service from the same channel to a
different programme number. To do this, select a new programme number from
the display using the
V or v button, then press the YELLOW button to display the
full service list for the channel. Press the V or v button to select the service you
require on the chosen programme number, then press the OK button to return to
the Manual Tuning programme list display.
6. If you wish to tune in more channels, highlight a new programme
number using the
V or v button, then press OK. Repeat steps 3 to 5.
Programme Sorting
Use this option to change the order of the stored channels. With the
‘Programme Sorting’ menu displayed on the screen, press the
V or v buttons
to highlight the channel you wish to move then press the YELLOW button.
Use the numbered buttons on your remote control to enter the new
programme number for your chosen channel then press the OK button to
confirm. Repeat this procedure to move other channels.
Once you have made all the changes you require in the Installation menu,
press the BLUE button repeatedly to remove all menus from the TV screen.
GBpages14-22.fm Page 17 Tuesday, October 15, 2002 10:28 AM