Sony KD-32NX200E - Manual (Page 20)

Digital features
18
1
4
7
3
6
9
2
5
8 8
0
OK
The Main Menu
Detailed set-up
Use this option to change your PIN number, modem settings and languages etc.
1. Press the button, then the BLUE button on the remote control to display the
Main Menu.
2. Press the V or v button to highlight ‘Detailed Set-up’, then press the OK button
to display the Detailed Set-up menu.
3. If you wish to change any of the settings on the menu screen, press the V or v
button to select your chosen item then press the OK button to display the
relevant sub menu.
PIN Set-up
This allows you to exercise parental control over programme viewing. Enter
your existing PIN and press OK. Use the numbered buttons on your remote
control to enter your new number, then enter again to confirm. Press the OK
button then the BLUE button to return to the Detailed Set-up menu.
Note:
If you have forgotten your PIN code, please use 9999. This PIN code will always be
accepted.
Modem
This allows you to set up the supplied modem. Press the
V or v button to select
your chosen item on the screen then press the OK button to confirm. Press the
V or v button to change the setting then press the OK button to store. Press
the BLUE button to return to the Detailed Set-up menu.
Return Channel
Press the
V or v buttons to select your chosen item on the menu screen then
press the OK button to display the keyboard*. Press the RED button to clear any
existing name then, using the
V, v, B or b buttons, select the first letter or
number you require. Press the OK button to display the letter or number in the
name box. Repeat the procedure until the name is complete then, after using
the
V, v, B or b buttons to highlight DONE, press the OK button. Finally, press
the BLUE button to return to the Detailed Set-up menu.
Note:
If you select ‘Default ISP’ or ‘DNS IP Address’ you need to use the numbered buttons on
your remote control to input your new settings. Once complete, press the OK button to
confirm.
MHP Applications Rights
This allows you to set your preferences and also limit some MHP Applications.
Press the
V or v buttons to select your chosen item on the screen, then press
the OK button to confirm. Press the V or v button to change the setting as
desired, then press the OK button to store the new setting. Press the BLUE
button to return to the Detailed Set-up menu.
Languages
Press the
V or v button to select the Audio Language you want, then press the
OK button to confirm and store the new setting. Press the BLUE button to return
to the Detailed Set-up menu.
Manufacturer information
This is an information screen only and confirms the signal strength and which
versions of hardware and software are available. Press the BLUE button to
return to the Detailed Set-up menu.
Software Upgrade
This allows the TV to automatically upgrade its software when a new version is
transmitted. Press the
V or v buttons to set to ‘Yes’ or ‘No’ then press the OK
button to store. When set to ‘Yes’, any new operating software is automatically
downloaded when released. We recommend this option is set to ‘Yes’.
Factory settings
Press the OK button to select ‘Clear Personal Settings’ (this returns all your
digital settings to their factory pre-set levels).
4. Once you have made all the changes you require in the Detailed Set-up menu,
press the BLUE button repeatedly to remove all menus from the TV screen.
Note:
The CA Set-up option is explained on the following page.
GBpages14-22.fm Page 18 Tuesday, October 15, 2002 10:28 AM