Sun Microsystems Sun Fire X4200 M2 - Manual (Page 22)

14 Sun Fire X4100 and Sun Fire X4200 Installation Guide • October 2006
4. Connect Ethernet cables to the “NET” connectors as required for your Gigabit
Ethernet or a management network.
■ The connectors labeled “NET 0” through “NET 3” are Gigabit Ethernet ports.
■ The port labeled “NET MGT” is a 10/100 Ethernet port that can connect your
system to a management network.
5. If desired, connect an RJ-45 serial port cable to the “SERIAL MGT” connector.
Note the following considerations for the serial port and serial port cabling:
■ The default serial port speed is 9600 baud with no flow control.
■ These servers use the same pinout as the RJ45 port on the RSC/ALOM/ALOM
Plus cards on Sun Netra™ and other Sun Fire systems.
■ There is a compatible Sun RJ45-to-DB9 Adapter shipped with the server, part
number 530-3100.
■ An alternative, compatible cable is the CISCO 72-3383-01 console cable.
6. Continue with “Powering On and Powering Off the Server” on page 15 .