Sun Microsystems Sun Fire X4200 M2 - Manual (Page 3)

iii
Contents
Preface v
1. Setting Up the Server Hardware 1
Installation Overview 1
Installing the Server Into a Rack With Optional Slide-Rails 2
Disassembling the Slide-Rails Before Installation 3
Installing the Mounting Brackets Onto the Server 4
Attaching the Slide-Rail Assemblies to the Rack 5
Installing the Server Into the Slide-Rail Assemblies 6
Installing the Cable Management Assembly 7
Attaching and Routing Cables 11
Verifying Operation of the Slide-Rails and CMA 12
Cabling 13
Powering On and Powering Off the Server 15
To Apply Standby Power for Initial Service Processor Configuration 15
Powering On Main Power Mode 16
Shutting Down Main Power Mode 16
2. Setting Up the Server Software 19
Introduction to the Integrated Lights Out Manager 19