Sony DR-BT101IK - Manual (Page 2)

  US US
DR-BT101iK_U [US, ES] 4-139-303-11(1)
  US US
DR-BT101iK_U [US, ES] 4-139-303-11(1)
WARNING
To reduce the risk of fire or electric
shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of electrical
shock, do not open the cabinet.
Refer servicing to qualified
personnel only.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
Do not expose the batteries (battery
pack or batteries installed) to excessive
heat such as sunshine, fire or the like
for a long time.
Excessive sound pressure from
earphones and headphones can cause
hearing loss.
The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license.
Microsoft, Windows and Windows
Vista are registered trademarks or
trademarks of Microsoft Corporation
in the United States and/or other
countries.
iPod, Macintosh and Mac OS are
trademarks of Apple, Inc., registered in
the U.S. and other countries.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and Thomson.
Other trademarks and trade names are
those of their respective owners.
Owner’s Record
For the Bluetooth headset, the model
number is located on the surface of the
right housing and the left rear side
rails of the headband. You can check
the serial number at the left by
detaching the earpad.
For the Bluetooth transmitter, the
model number and the serial number
are located on the rear of the
transmitter. Record these numbers in
the spaces provided below. Refer to
them whenever you call upon your
Sony dealer regarding this product.
Model No. DR-BT101
Serial No.
Model No. TMR-BT8iP
Serial No.
Information
If you have any questions about this
product, you may call:
Sony Customer Information Service
Center
1-800-222-7669 or
http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model No.: DR-BT101
Responsible Party: Sony Electronics
Inc.
Address: 16530 Via
Esprillo, San
Diego, CA 92127
USA
Telephone No.: 858-942-2230
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.