Sony DR-BT101IK - Manual (Page 27)

DR-BT101iK_U [US, ES] 4-139-303-11(1) DR-BT101iK_U [US, ES] 4-139-303-11(1)
 US
Pairing headset with other Bluetooth transmitting devices
1
Place the Bluetooth transmitting device to be paired together
within 1 m (3 ft) of the headset.
2
Press and hold the PAIRING button for 2 seconds or more to enter
standby for pairing while the headset is turned off.
The headset indicators (blue and red) flash together and the headset
enters into pairing mode.
3
Turning Bluetooth transmitting device to pairing standby mode.
See the operating instructions supplied with the Bluetooth
transmitting device.
The list of detected devices appears on the display of the Bluetooth
transmitting device.
The headset is displayed as “DR-BT101.”
This headset indicator status will vary as follows, and pairing is
established with the Bluetooth transmitting device.
The headset indicators (blue and red) flash quickly: pairing mode

The headset indicator (blue) flashes (at about 1-second intervals)
when responding to the Bluetooth transmitting device: Connectable
(Pairing successful)

The headset indicator (blue) flashes (at about 5-second intervals):
Connected
Continued
