Sony MHC-GNX66 - Manual (Page 29)

So
un
d Ad
ju
stmen
t
masterpage:Right
\Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB08TAP-
model name[MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]
[2-547-453-11(2)] GB
29 GB
(MHC-GNX100/GNX88/GNX80 only)
You can use the sound of the subwoofer to
enhance the bass.
1
Press SUBWOOFER ON/OFF on the
subwoofer repeatedly until the
indicator lights up.
The subwoofer is turned on.
2
Turn SUBWOOFER LEVEL to adjust
the level.
You will be able to listen to low bass
frequency sound.
To turn off the subwoofer
Press SUBWOOFER ON/OFF on the
subwoofer again.
Notes
• If you turn MASTER VOLUME (or press VOLUME
+/– on the remote), the volume for all speakers will
change.
• (MHC-GNX100 only)
When you select “SPEAKERS B”, the subwoofer is
turned off automatically.
Tip
You can turn MASTER VOLUME (or press
VOLUME +/– on the remote) to adjust the volume of
the subwoofer linked to the front speakers.
With the sound flash function, you can flash the
sound output. The sound cuts off periodically.
Hold down SOUND FLASH during
playback.
The flashing effect is activated.
To cancel the flashing effect
Release SOUND FLASH.
To change the sound flash speed
Hold down SOUND FLASH and turn
OPERATION DIAL clockwise or
counterclockwise to change the sound flash
speed (1 ~ 20).
Tips
• (MHC-GNX100 only)
You can activate the X-ROUND and SOUND
FLASH effect simultaneously.
• The power illuminator will synchronize with the
selected SOUND FLASH effect.
Using the subwoofer Flashing sound effect
— SOUND FLASH