Sony MHC-GNX66 - Manual (Page 30)

masterpage:Left
\Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB08TAP-
model name[MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]
[2-547-453-11(2)] GB
30 GB
You can create a party environment by using
X-ROUND for “moving” sound effect or/and
SOUND FLASH for flashing effect.
To enjoy the X-ROUND effect, place your front
and surround speakers at an equal distance from
your listening position (see “Positioning the
speakers for MHC-GNX100” on page 12).
Moving sound effect
— X-ROUND
Press one of the X-ROUND buttons to
select the X-ROUND mode you want.
The name of selected X-ROUND mode appears
and the X-ROUND lights up in the display.
Tip
To change between AUTO WAVE and MANUAL
WAVE, AUTO FADER and MANUAL FADER or
AUTO BAL and MANUAL BAL, press AUTO/
MANUAL repeatedly until the mode you want appears
in the display.
1) You can change the speed of sound movement by
turning the X-ROUND JOG clockwise or
counterclockwise.
2) You can manually change the sound movement from
one speaker to another speaker by turning the
X-ROUND JOG clockwise or counterclockwise.
To cancel the X-ROUND effect
Press X-ROUND OFF. “X-ROUND OFF”
appears in the display.
Notes
• If you cannot get the sound effect you want, check
the speaker connections.
• When the headphones are connected to the PHONES
jack, X-ROUND mode automatically turned off and
you cannot change the setting.
Creating a party
environment
(MHC-GNX100 only)
Select To output sound
AUTO WAVE
1)
,
MANUAL
WAVE
2)
In circular motion
AUTO FADER
1)
,
MANUAL
FADER
2)
From front speakers to surround
speakers or vice versa
AUTO BAL
1)
,
MANUAL BAL
2)
From left speakers to right
speakers or vice versa
RANDOM In random position
TWISTER In circular motion like “twister”