Sharp SL-5500 - Manual (Page 134)

Internet Settings 129
Note: For information on how to configure the USB or serial connection, see
the separate on-line manuals, “Qtopia Desktop” or “Intellisync for SL”.
Keep the default setting for normal use.
Creating a new setting
1.
Tap “Add...” in the Services folder.
The Add Network Service screen will be displayed.
Setting up PPP preferences
By setting up the PPP preferences, you can connect to a telephone line to access
the Internet.
Note: Specifying the IP address is not supported.
1.
On the Add Network Service screen, tap “Dial-up - PPP” or “IrDA - PPP” in the
Network Service list and then tap “Add”.
“Properties” button Displays the properties of the network service selected in the
list. On the screen that appears, you can edit settings.
Sync folder
USB IP Address
Enter the IP address to be used for USB connection.
Serial IP Address Enter the IP address to be used for serial cable connection.
Apply button Tap to save the setting above.
Network Service list
Add button Cancel button
00.Cover.book Page 129 Monday, January 21, 2002 5:47 PM