Sony BRAVIA KDL-26P25 - Manual (Page 26)

26 GB
KDL-40/32/26U2000
2-693-044-41(0)
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDL-40P25xx: 40 inches
KDL-32P25xx: 32 inches
KDL-26P25xx: 26 inches
Display Resolution:
1,366 dots (horizontal) × 768 lines (vertical)
Power Consumption:
KDL-40P25xx: 190 W or less
KDL-32P25xx: 115 W or less
KDL-26P25xx: 100 W or less
Standby Power Consumption*:
KDL-40P25xx: 0.8 W or less
KDL-32P25xx: 1 W or less
KDL-26P25xx: 1 W or less
* Specified standby power is reached after the TV
finishes necessary internal processes.
Dimensions (w × h × d):
KDL-40P25xx:
Approx. 988 Ч 687 Ч 270 mm (with stand)
Approx. 988 Ч 653 Ч 128 mm (without stand)
KDL-32P25xx:
Approx. 797 Ч 580 Ч 220 mm (with stand)
Approx. 797 Ч 548 Ч 125 mm (without stand)
KDL-26P25xx:
Approx. 663 Ч 503 Ч 220 mm (with stand)
Approx. 663 Ч 472 Ч 128 mm (without stand)
Mass:
KDL-40P25xx:
Approx. 24 kg (with stand)
Approx. 21 kg (without stand)
KDL-32P25xx:
Approx. 15 kg (with stand)
Approx. 13 kg (without stand)
KDL-26P25xx:
Approx. 12 kg (with stand)
Approx. 10 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Analogue: Depending on your country/region selection:
B/G/H, D/K, L, I
Digital: DVB-T
Colour/Video System
Analogue: PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
Analogue: VHF: E2–E12
UHF: E21–E69
CATV: S1–S20
HYPER: S21–S41
D/K:
R1–R12, R21–R69
L: F2–F10, B–Q, F21–F69
I: UHF B21–B69
Digital: VHF/UHF
Terminals
/ 1
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video
output.
/ 2 (SMARTLINK)
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video
output, and SMARTLINK interface.
3
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
3
Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
4 S video input (4-pin mini DIN)
4 Video input (phono jack)
4 Audio input (phono jacks)
Audio output (Left/Right) (phono jacks)
PC PC Input (15 Dsub) (see page 24)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms, non Sync on Green
R: 0.7 Vp-p, 75 ohms, non Sync on Green
HD: 1-5 Vp-p
VD: 1-5 Vp-p
PC audio input (minijack)
HDMI IN 6, 7
Video: 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio (phono jacks):
500 mVrms, Impedance 47 kilohms
(HDMI IN 7 only)
i Headphones jack
CAM (Conditional Access Module) slot
Sound Output
KDL-40P25xx: 10 W + 10 W (RMS)
KDL-32P25xx: 10 W + 10 W (RMS)
KDL-26P25xx: 10 W + 10 W (RMS)
Supplied Accessories
Refer to “1: Checking the accessories” on page 4.
Optional Accessories
• Wall-Mount Bracket
SU-WL51 (for KDL-40P25xx)
SU-WL31 (for KDL-32P25xx / KDL-26P25xx)
Design and specifications are subject to change
without notice.
Additional Information
010COV.book Page 26 Friday, January 19, 2007 9:53 AM