Sony DVP-NS700P - Manual (Page 24)

24
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
x Recommended surround sound effects using this connection with your
amplifier (receiver)
N Dolby Digital (5.1ch) (page 79)
N DTS (5.1ch) (page 79)
z To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL”(page 25).
If your AV amplifier (receiver) has a DTS decoder, set “DTS” to “ON” (page 25). Otherwise, no sound or a loud
noise will come from the speakers.
Connecting to an AV amplifier (receiver) with a digital input jack having a
Dolby Digital, or DTS decoder, and 6 speakers
D
COAXIAL OPTICAL
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2 PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Y
SELECTABLE
INTERLACE
PROGRESSIVE
P B
P R
LINE OUT OUT
S VIDEO
VIDEO OUT
COMPONENT
SCAN SELECT
VIDEO OUT
D
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Front
(R)
Rear
(R)
AV amplifier (receiver) with a decoder
Subwoofer Center
[Speakers] [Speakers]
CD/DVD player
or
l : Signal flow
Coaxial digital cord
(not supplied)
to optical digital input
to coaxial digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Front
(L)
Rear
(L)