Sony DVP-NS700P - Manual (Page 30)

30
Notes on playing DTS sound tracks on
a CD
N When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jacks of the
player.
N Set the sound to “STEREO” using the
AUDIO button when you play DTS sound
tracks on a CD (page 49).
N Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (OPTICAL and
COAXIAL) jacks even if “DTS” in
“AUDIO SETUP” is set to “OFF” in the
Setup Display (page 75), and may affect
your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS
sound track
N DTS audio signals are output only through
the DIGITAL OUT (OPTICAL and
COAXIAL) jacks.
N If you connect the player to audio
equipment without a DTS decoder, do not
set “DTS” to “ON” in “AUDIO SETUP”
(page 75). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
N When you play a DVD with DTS sound
tracks, set “DTS” to “ON” in “AUDIO
SETUP” (page 75).
z The Instant Replay function is useful when you
want to review a scene or dialog that you missed.
Note
You may not be able to use the Instant Replay function
with some scenes.
Additional operations
To Operation
Stop Press x
Pause Press X
Resume play after
pause Press X or H
Go to the next chapter,
track or scene in
continuous play mode Press >
Go back to the
preceding chapter,
track or scene in
continuous play mode Press .
Stop play and remove
the disc Press Z
Replay a previous
scene (DVD only) Press INSTANT
REPLAY
1 2 3
4 5 6
7 8 9
0
H
./>
Z
X
x
INSTANT
REPLAY