Sony RM-VL710 - Manual (Page 13)

13
To control the volume
Press VOL +/– to control the
volume. Press MUTING to mute
the sound.
When you select a visual
component, the TV’s volume will
be controlled (TV Component
Select button lights up), and when
you select an audio component,
the amplifier’s volume will be
controlled (AMP Component
Select button lights up). You can
change this setting also (page 23).
Notes
• If you used the Learning function
(page 14) to program the VOL +/– or
MUTING buttons to send a signal to
any other component, that signal will
be transmitted instead of the volume
or muting of the TV or amplifier
when you select that component.
• If you used the Learning function
(page 14) to program the VOL +/– or
MUTING buttons for the TV or AMP
to send a signal to any other
component, that signal will be
transmitted only when you select TV
or AMP. When you select another
component, the preset volume control
signals for TV or AMP will be
transmitted.
• If you have assigned another
component to the TV or AMP buttons
(page 30), the volume of the TV or
amplifier cannot be controlled even if
you select another component.
2
Press any Player Control
button.
See “Table of Preset Functions”
(page 37) for the functions of
buttons for each component.
Note
The remote control signals may be
different for some components or
functions. In this case, program the
remote control signals with the
Learning function (page 14). Note,
however, that components and
functions that do not support the
remote control of infrared signals will
not work with this Commander.