Sony RM-VL710 - Manual (Page 8)

8
1
4
7
2
5 6
8 9
3
SET
0
CBL DVD AMP TV VCR
POWER
ENT
2
4
5
2
3
2
Press and while holding
SET, press MENU.
All Component Select buttons
flash.
Example: To set up a Philips’ TV
1
See the tables in the
supplied “Component
Code Numbers”, and find
the four-digit component
code number for the
desired component.
If more than one code number
is listed, use the number that is
listed first.
For example, to set up a
Philips’ TV, you would use the
code number 8011.
Component
Select Button
TV
VCR
CBL
DVD
AMP
Factory setting
Sony TV
Sony VHS
VCR
Sony DVD
player
Sony amplifier
Preset
component(s)
TV
TV/VCR
Combo
VCR
Cable box
DVD player
Amplifier
Setting a component code
CBL DVD AMP TV VCR
SET +
MENU
Note
A CD player, an MD player and a
cassette deck can be set to any of the
above Component Select buttons. You
can assign Component Select buttons to
freely set signals of your desired
components. For further information,
see “Assigning Other Components to
the Component Select Buttons” (page
30) .
For the functions of buttons as for each
component, see “Table of Preset
Functions” (page 37).
Basic Operations
Setting the Code for
non-Sony Preset
Audio and Visual
Components
— Setting
component codes
The Commander is preset at the
factory to operate Sony brand AV
components (see the table below).
If you are using the Commander
with a factory-set Sony
components, skip the following
procedures.
You can use the Commander with
other major brand preset AV
components also. To use with
other AV components, or Sony
components which do not
function with the Commander,
you need to follow the procedures
to set the correct codes for each
component.