Sony XR-C7200W - Manual (Page 6)

6
EN
Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
Note
The AMS function may not work when:
• the blanks between tracks are shorter than four seconds.
• there is noise between tracks.
• there are long sections of low volume or quiet sections.
Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
z Tape playback z Clock z Frequency*
* While the ATA function is activated.
Playing tracks repeatedly
— Repeat play
You can repeat play the current track.
1
During playback press (SHIFT).
Each time you press (SHIFT), only the items
you can select light up.
2
Press (6) (REP).
Repeat play starts.
To go back to the normal playback mode, press
(6)
again.
3
Press (SHIFT).
SEEK/AMS
To locate
succeeding tracks
To locate preceding
tracks
1 2 3 4 5 6
SHIFT
PLAY MODE REP
Cassette Player
Listening to a tape
1
Press (OPEN) and insert a cassette.
Playback starts automatically.
2
Close the front panel.
If a cassette is already inserted, press
(SOURCE)
until “FWD” or “REV” appears to
start playback.
The side facing up is being played.
The side facing down is being played.
Tips
• To change the tape transport direction, press (MODE)
(*).
• “Metal” appears in the display when you insert a metal
or CrO
2
tape (Auto Metal function).
To Press
Stop playback (OFF)
Eject the cassette (OPEN) then 6
Fast-winding the tape
During playback, press either side of
(SEEK/AMS) for one second.
To start playback while fast-forwarding or
rewinding, press (MODE)(*).
6
SEEK/AMS
Fast-forward
Rewind
F W D
Play SUR EQ
R E V
Play SUR EQ