Speco Technologies DVR-16TT - Manual (Page 54)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 53
NOTE:
If you want to upgrade your unit with a USB ThumbDrive ®
contains the newest software, make sure the software you want to use
to update the unit should be fold into a folder named “upd-200s”,
otherwise, the unit cannot recognize it.
NOTE: Power interruption cannot occur during the software upgrade
process. Ensure that no power interruption can happen until the unit is
completely rebooted.
NOTE
: Do not remove the external USB ThumbDrive ® /CD-ROM
before the unit has completely shut down (hard drive and fan are off).
Removing the external USB ThumbDrive
® /CD-ROM before shut down
can cause the system to update improperly.
5.1.1.3 Software Upgrade via Internet
This item is used to upgrade the unit’s software via the internet. Select one of
the listed software versions and choose <YES>. The
DVR-4TN/8TN/16TN/16TS/16TT
series uploads the software, updates the
system files and reboots automatically.
5.1.2 Language
The Language item allows the user to select the language for the OSD menu
and screen messages. Language selection takes effect immediately when the
selection is done. Press UP / DOWN to select from languages listed and
press ENTER to confirm.